Portwell: flexible wireless sensor nodes for IoT applications

Portwell announces a series of wireless sensor nodes, DS-1 and DS-1B, supporting Arduino IDE and a wide variety of options for sensors and wireless connectivity. The DS-1 series integrates numerous sensors with the electronic and mechanical characteristics, dramatically decreasing circuit and mechanical complexity. The DS-1 series is a highly flexible sensor node solution that makes construction easier, faster and simpler and can be applied in almost any IoT application imaginable.

Adopting the Wi-Fi communication module and integrating sensors of smoke, CO, gas, temperature, humidity and PIR (passive infrared) motion, the DS-1 sensor node series enables an intelligent system to rapidly understand the home environment and provide a more comfortable and safer living experience.

With LoRa long range, low power wireless technology and sensors of soil humidity, CO2 and UV, the DS-1 sensor node series enables an intelligent system to collect useful and valuable data to empower smart farming, such as analyzing the best cultivation plan for the highest yields.

Adopting the Wi-Fi or ZigBee communication module and integrating sensors of flame, combustible gas, alcohol, harmful gas and vibration, the DS-1 sensor node series helps place factory operation under smart control by providing an intelligent system that detects if any of these factors might be at a level that risks interrupting the factory’s operation.

 

Latest News from Portwell

Portwell: 4x4-inch Mini PC board for digital signage, automation and medical
Portwell: compact embedded system ideal for kiosk, digital signage, factory automation
Portwell: palm-sized PICO-6260 offers low power and fan-less design
MEDWEL: embedded fanless system with E3900 processors for medical applications
Portwell: compact fan-less embedded system supports wide industrial temperature range
Portwell: rugged fan-less embedded system with wide voltage of power input
Portwell: COM Express 3.0 type 7 basic module with four 10GbE interfaces
Portwell: COM Express 3.0 module optimized for network appliances
Portwell: heterogeneous architecture platform for software-defined storage applications
Portwell: application focused “RS4U - Ready Solution for You” Box PCs
Portwell: flexible wireless sensor nodes for IoT applications
Portwell releases highly composable IoT gateway
Portwell: COM Express type 6 basic module for medical healthcare and retail systems
Portwell: basic COM Express module for medical healthcare, retail and IoT

ZES Zimmer on testing advanced power electronics

In this video Bernd Neuner from ZES Zimmer talks to Alix Paultre for Electronic News TV at the 2017 Power Electronics Conference in Nuremberg. The discussion deals with the issues involving test and m...


Weidmüller discusses the need for a better signal and power interface

In this video Rene Arntzen from Weidmüller talks to Alix Paultre of Electronic News TV about the importance of a good signal and power interface for industrial equipment. There is currently no good ...


Mouser talks about the state of engineering development today

In this video Mark Burr-Lonnon and Graham Maggs of Mouser Electronics, a major international electronics distributor, talk to Alix Paultre about the state of engineering development today. With massiv...


Infineon launches a new family of configurable industrial drive boards

In this video Infineon explains their new family of configurable industrial drive boards at SPS-IPC Drives 2017. Intended to enable easy setup and deployment, the XMC-based automation boards can handl...


STMicro explains their STSPIN family of single-chip motor drivers

In this video STMicroelectronics explains their STSPIN single-chip motor drivers at SPS-IPC Drives 2017. The STSPIN family embeds can drive motors efficiently and with high accuracy, with an advanced ...