Atlantik Elektronik: Bluetooth low energy controller from Holtek

Atlantik Elektronik presents the new Bluetooth Low Energy Controller from Holtek. The BC7601 and BC7602 especially developed for Bluetooth Low Energy applications. Dedicated for transparent transmission, the devices are suitable for applications such as health care products, home appliances and smart device information beacons to name but few. The devices include high performance RF and MODEM functions and with their fully integrated DC/DC converter and linear voltage regulator they provide a stable and wide voltage range single power supply.

Both devices include a low power transmitter and receiver, with the receiver having a programmable gain of up to 75dB and a sensitivity of up to -90dBm. Excellent low power operating modes are provided including Sleep and Power down modes. Additionally, the BC7602 includes an area of patch memory to reduce the development workload and system cost.

The BC7601 is supplied in a 32-QFN (4x4mm) package type while the BC7602 is supplied in a 46-QFN (6.5x4.5mm) package type, which is well suited for miniaturized BLE applications. Full BLE transparent transmission can be implemented by using the SPI serial peripheral interface or the UART universal asynchronous receiver/transmitter, convenient solutions which offer the best present choices for low energy Bluetooth transparent transmission controllers.

Latest News from Atlantik Elektronik

Atlantik Elektronik: Bluetooth low energy controller from Holtek
Atlantik: LTE Cat 1 module supports MIMO technology
Atlantik presents Quectel´s first CAT-M1 modul for the IoT
Atlantik Elektronik: highest performance for embedded solutions
Atlantik Elektronik: IoT module from SparkLAN supports stable and secure radio transmission
Atlantik Elektronik presents Bluetooth Smart SoC from Qualcomm

ZES Zimmer on testing advanced power electronics

In this video Bernd Neuner from ZES Zimmer talks to Alix Paultre for Electronic News TV at the 2017 Power Electronics Conference in Nuremberg. The discussion deals with the issues involving test and m...


Weidmüller discusses the need for a better signal and power interface

In this video Rene Arntzen from Weidmüller talks to Alix Paultre of Electronic News TV about the importance of a good signal and power interface for industrial equipment. There is currently no good ...


Mouser talks about the state of engineering development today

In this video Mark Burr-Lonnon and Graham Maggs of Mouser Electronics, a major international electronics distributor, talk to Alix Paultre about the state of engineering development today. With massiv...


Infineon launches a new family of configurable industrial drive boards

In this video Infineon explains their new family of configurable industrial drive boards at SPS-IPC Drives 2017. Intended to enable easy setup and deployment, the XMC-based automation boards can handl...


STMicro explains their STSPIN family of single-chip motor drivers

In this video STMicroelectronics explains their STSPIN single-chip motor drivers at SPS-IPC Drives 2017. The STSPIN family embeds can drive motors efficiently and with high accuracy, with an advanced ...