Atlantik Elektronik: Ethernet network connectivity for industrial machines

Atlantik Elektronik presents the xPico 110 industrial networking module, a compact device server module that has been developed by Lantronix to make it easy to IoT-enable legacy industrial devices. The Lantronix xPico 110 is specifically designed for industrial environments such as Building Automation, Renewable Energy, Industrial Machines as well as Access Control & Physical Security. The xPico 110 allows OEMs to quickly add robust Ethernet network connectivity into their industrial devices.

The xPico 110 features a TCP/IP stack with web server and networking services. Its TruPort Serial technology, and hardware-based, 256-bit AES (Advanced Encryption Standard) operation, is claimed to provide secure serial data communication. The compact footprint, measuring 18 x 31mm makes it easy to integrate into virtually any industrial design.

There are two universal asynchronous receiver/transmitter (UART) interfaces in the xPico 110. One can be used to connect to virtually any eight-, 16- or 32-bit MCU. The on-board, secure TCP/IP stack helps simplify application firmware design and improves security and reliability. The integrated web server and network services provide a range of connectivity features, and eight GPIO pins are available to be programmed by the user. An on-module PHY helps simplify connector integration. The xPico 110 module operates from -40 to +85°C and comes with a five-year manufacturer warranty. The Lantronix xPico 110 wired device server, Ethernet networking module for embedded and industrial applications, is easy to integrate, with minimal engineering effort.


ZES Zimmer on testing advanced power electronics

In this video Bernd Neuner from ZES Zimmer talks to Alix Paultre for Electronic News TV at the 2017 Power Electronics Conference in Nuremberg. The discussion deals with the issues involving test and m...


Weidmüller discusses the need for a better signal and power interface

In this video Rene Arntzen from Weidmüller talks to Alix Paultre of Electronic News TV about the importance of a good signal and power interface for industrial equipment. There is currently no good ...


Mouser talks about the state of engineering development today

In this video Mark Burr-Lonnon and Graham Maggs of Mouser Electronics, a major international electronics distributor, talk to Alix Paultre about the state of engineering development today. With massiv...


Infineon launches a new family of configurable industrial drive boards

In this video Infineon explains their new family of configurable industrial drive boards at SPS-IPC Drives 2017. Intended to enable easy setup and deployment, the XMC-based automation boards can handl...


STMicro explains their STSPIN family of single-chip motor drivers

In this video STMicroelectronics explains their STSPIN single-chip motor drivers at SPS-IPC Drives 2017. The STSPIN family embeds can drive motors efficiently and with high accuracy, with an advanced ...