Mouser: IoT modular platform for smart and connected cloud-based apps

Mouser Electronics is now stocking the IoT Development Kit from ON Semiconductor. Combining hardware and software elements to enable rapid implementation of smart and connected cloud-based applications, ON Semiconductor’s IoT Development Kit provides engineers with all of the building blocks needed to speed the evaluation, design and implementation of medical-, home- and industrial-based Internet of Things designs. The IDK is a modular, easy-to-use platform that offers designers a market-leading portfolio of power-efficient semiconductors that includes sensors, power management, connectivity, processors and actuators.

The ON Semiconductor IoT Development Kit, available from Mouser Electronics, features a Wi-Fi-enabled baseboard that incorporates ON Semi’s NCS36510 SoC, a low-power-optimized 32-bit ARM Cortex-M3 core that runs the ARM mbed operating system. A wide selection of different modules or daughter cards can then be attached to the baseboard to provide various types of functionality based on design need. In addition, the kit supports cloud connectivity by state-of-the-art protocols such as MQTT and REST, and offers added support for security functions including encryption, secure debug, secure boot and authentication.

Along with the hardware, the ON Semiconductor IDK also includes a comprehensive software development framework that encompasses the embedded operating system, drivers, APIs for hardware shields (where each device has its own API, for a total of 21 APIs), a graphical user interface (GUI) and sample applications code. This highly flexible IDK has been designed to address a broad spectrum of IoT markets and applications, including motor control, climate and sense control, lighting control, process and industrial control, motion control, position control, and patient monitoring and healthcare.

Latest News from

Mouser: low-cost motor controller includes six-channel PWM module
Mouser: IoT modular platform for smart and connected cloud-based apps
Mouser: Bluetooth 5 MCU for IoT applications supports over-the-air updates
Mouser signs global agreement with D3 Semiconductor
Mouser: NXP LPC546xx 32-bit MCUs and development board now shipping
Mouser: nanoPower boost converter helps extend battery life
Mouser: single-ended low noise amplifiers for RF applications
Mouser stocking ultra-low-power MEMS oscillators from Microchip

Dirk Giesen describes the Parasoft tool suite for Embedded Software Development

Are you responsible for embedded software development in your organization? Your goal should be to create safe, secure, and reliable software. To make sure your device will work properly, deploy Paras...


Ross Sabolik of Silicon Labs talks about advanced Power over Ethernet

In this video Ross Sabolik of Silicon Labs talks about smart  Power over Ethernet systems with Alix Paultre at their APEC exhibit in San ANtonio, Texas. As PoE migrates to higher power levels and...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


Steve Allen of pSemi explains their latest LED driver solution

Steve Allen of pSemi explains their latest LED boost product based on Arctic Sand's two-stage architecture. Their PE23300 has a charge-pump, switched-capacitor architecture that offloads most of t...


Teledyne describes their latest 12-bit Wavepro HD oscilloscope

In this video Teledyne LeCroy describes their latest Wavepro HD oscilloscope to Alix Paultre of Power Electronics News at the company's launch event. The WavePro HD high-definition oscilloscope de...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


ROHM explains their latest wireless battery charger solution kit

In this video an engineer from ROHM goes over their latest wireless power development kit, co-developed with Würth for embedded development. The kit provides a complete wireless power transfer sy...


Tektronix describes their latest mixed-signal oscilloscope

In this video Tektronix explains the features in their latest 5 Series MSO Mixed Signal Oscilloscope. Features include an innovative pinch-swipe-zoom touchscreen user interface, a large high-definitio...


AVX shows a supercapacitor demonstrator at APEC

In this video Eric from AVX explains their supercapacitor demonstrator box at APEC 2018 in San Antonio, Texas. The box shows how a 5V 2.5-farad supercapacitor can quickly charge up using harvested ene...


OnSemi explains their latest passive smart wireless sensor for industrial applications

In this video On Semiconductor explains their latest wireless sensor for hazardous environments at APEC in San Antonio, Texas. Intended for applications like high-voltage power cabinets and other plac...


TI demonstrates an improved gaming power system at Embedded World

In this video Texas Instruments' explains Significant reduction in ripple, which results in improved reliability and increased design margins, among other advantages. Another benefit that improve...


Infineon explains their latest motor drive technology at APEC 2018

In this video Infineon demonstrates new gate drivers using their LS-SOI technology at APEC 2018. In the demo Victorus, an Infineon application engineer, shows in real time how much better thermal the ...


STMicro goes over their latest wireless-enabled microcontroller for the IoT

In this video STMicroelectronics goes over their latest wireless-enabled STM32WB microcontroller for the IoT and intelligent devices in several live connectivity demonstrations at Embedded World 2018....