Acceed: energy-saving gateway to IIoT offers a variety of wireless interfaces

Connectivity is trumps in the Industrial Internet of Things. Energy-efficiency and cost efficiency denote further significant factors. The new IoT Gateway Matrix MXE-110i, offered by Acceed, is precisely tailored to meet these requirements. Based on the Quark SoC X1021 from Intel, the processor optimised for energy-saving applications, the industry gateway integrates the Wind River Intelligent Device Platform XT 3.1. This enables a wide range of applications for industrial IoT applications such as Smart City, Facility Management, intelligent factory automation or extensive smart client agricultural applications which require especially low energy consumption.

One of the focal points of the IoT gateway Matrix MXE-110i is the variety of wireless interfaces via the USIM socket, starting with classical Wi-Fi, via BT and LoRa up to 3G and 4G/LTE. LoRaWan (Long Range Wide Area Network) is a wireless network protocol geared to top energy efficiency and energy-savings developed specifically for communication in the Internet of Things.

Respectively two LAN 10/100MbE interfaces, COM ports (RS-232, RS-232/422/485), USB 2.0 hosts and Mini-PCIe slots are available for further classical data exchange. A factory-installed eMMC (embedded Multimedia Card) serves as a boot-capable storage medium and is suitable for operating systems such as iOS, Android, Windows and Google Chrome OS.

The MXE-110i has a fanless and at the same time exceptionally compact casing with the dimensions 120 x 50 x 100 mm, in accordance with industry requirements. Its robust construction allows use in harsh environments and includes vibration resistance up to 5 Grms, impact resistance up to 100 G, and the extended operating temperature range from -20 up to +70 °C.

The latest IoT gateway technology version from Intel is available for operation, security, scalability, interoperability and administrative improvements as well as extended support for various fieldbus communication protocols such as Modbus (RTU/Ethernet), BACNet, CAN for industrial applications, Exegin, Zigbee, Open Z-Wave and 6LoWPAN for intelligent building control. Further features include support for MQTT, Bluetooth/BLE, CoAP, XMPP device-to-cloud-protocol, as well as AllJoyn and IoTivity (open-source software framework) for direct, seamless connectivity between devices.


Latest News from ACCEED

Acceed: energy-saving gateway to IIoT offers a variety of wireless interfaces
acceed: dual 4G LTE router with waterproof sockets
acceed: Modbus/TCP module for 3 temperature sensors
acceed: industrial switch with PoE and M12 according to EN 50155
Acceed: graphics power for industrial applications

ZES Zimmer on testing advanced power electronics

In this video Bernd Neuner from ZES Zimmer talks to Alix Paultre for Electronic News TV at the 2017 Power Electronics Conference in Nuremberg. The discussion deals with the issues involving test and m...

Weidmüller discusses the need for a better signal and power interface

In this video Rene Arntzen from Weidmüller talks to Alix Paultre of Electronic News TV about the importance of a good signal and power interface for industrial equipment. There is currently no good ...

Mouser talks about the state of engineering development today

In this video Mark Burr-Lonnon and Graham Maggs of Mouser Electronics, a major international electronics distributor, talk to Alix Paultre about the state of engineering development today. With massiv...

Infineon launches a new family of configurable industrial drive boards

In this video Infineon explains their new family of configurable industrial drive boards at SPS-IPC Drives 2017. Intended to enable easy setup and deployment, the XMC-based automation boards can handl...

STMicro explains their STSPIN family of single-chip motor drivers

In this video STMicroelectronics explains their STSPIN single-chip motor drivers at SPS-IPC Drives 2017. The STSPIN family embeds can drive motors efficiently and with high accuracy, with an advanced ...