Express Logic: X-Ware IoT platform to enhance device connectivity in smart home automation

Express Logic announces that its Industrial Grade X-Ware IoT Platform will soon include support for the Thread networking protocol. Created by the Thread Group, Thread is a reliable, low-power, secure, and scalable mesh networking solution that provides a foundation on which any application layer can run. Designed for devices and things that reside in the places where people live and work, Thread is an IPv6 networking protocol built on open standards for low-power 802.15.4 mesh networks, which easily and securely connect hundreds of devices to one another and directly to the cloud without draining battery life or one single point of failure.

The X-Ware IoT Platform is powered by Express Logic’s high-performance ThreadX RTOS and NetX Duo™ dual IPv4/IPv6 TCP/IP stack. The X-Ware IoT Platform leverages all the benefits of NetX Duo as well as Express Logic’s industrial-grade implementations of IPv6 over Low Power Wireless Personal Area Networks (6LoWPAN), Constrained Application Protocol (CoAP), and Datagram Transport Layer Security (DTLS).

The X-Ware IoT Platform contains no open source, is high performance, and boasts an extremely small footprint. The X-Ware IoT Platform automatically scales to use only what is needed by the application, making it perfectly suited for the smallest low-power IoT devices. 

In addition to the performance and size advantages of the X-Ware IoT Platform, ThreadX and NetX Duo have attained the highest level of safety certifications. They include IEC 61508 SIL 4, IEC 62304 Class C, ISO 26262 ASIL D, EN 50128 SW-SIL 4, UL 60730-1 Annex H, CSA E60730-1 Annex H, IEC 60730-1 Annex H, 60335-1 Annex R, and IEC 60335-1 Annex R, 1998.

Once certified, other developers will be able to confidently leverage the entire X-Ware IoT Platform solution, including the safety-certified FileX, GUIX, and USBX solutions and technologies, knowing it will seamlessly connect to other Thread-certified devices.

Latest News from Express Logic, Inc

Express Logic: ThreadX SMP certified for use in safety-critical IoT systems
Express Logic: X-Ware IoT platform achieves Thread product certification
Express Logic: X-Ware IoT platform to enhance device connectivity in smart home automation
Express Logic: ThreadX RTOS surpasses 6.2 billion total deployments
Express Logic: comprehensive solution portfolio for safety-critical IoT devices

ZES Zimmer on testing advanced power electronics

In this video Bernd Neuner from ZES Zimmer talks to Alix Paultre for Electronic News TV at the 2017 Power Electronics Conference in Nuremberg. The discussion deals with the issues involving test and m...


Weidmüller discusses the need for a better signal and power interface

In this video Rene Arntzen from Weidmüller talks to Alix Paultre of Electronic News TV about the importance of a good signal and power interface for industrial equipment. There is currently no good ...


Mouser talks about the state of engineering development today

In this video Mark Burr-Lonnon and Graham Maggs of Mouser Electronics, a major international electronics distributor, talk to Alix Paultre about the state of engineering development today. With massiv...


Infineon launches a new family of configurable industrial drive boards

In this video Infineon explains their new family of configurable industrial drive boards at SPS-IPC Drives 2017. Intended to enable easy setup and deployment, the XMC-based automation boards can handl...


STMicro explains their STSPIN family of single-chip motor drivers

In this video STMicroelectronics explains their STSPIN single-chip motor drivers at SPS-IPC Drives 2017. The STSPIN family embeds can drive motors efficiently and with high accuracy, with an advanced ...