Mouser: RSL10 SoC, ideal for IoT and connected health wearables

Mouser Electronics is now stocking the RSL10 multi-protocol system-on-chip from ON Semiconductor. Offering ultra-low-power wireless connectivity for a broad range of applications, the versatile Bluetooth 5-certified SoC supports Bluetooth low energy technology as well as 2.4 GHz proprietary or custom protocol stacks. The ON Semiconductor RSL10 SoC, available from Mouser Electronics, features a 48 MHz Arm Cortex-M3 processor bolstered by a 32-bit dual-Harvard DSP core that supports the audio codecs necessary for wireless audio communication. Including both flash and RAM, the device’s diverse memory architecture enables storage of the Bluetooth stack, as well as other applications.

The highly integrated RSL10 SoC includes a DMA controller, oscillators, and ultra-efficient power management units. The SoC is designed for use in applications with 1.2V and 1.5V batteries and supports a supply voltage range of 1.1 to 3.6 V without the need for an external DC/DC converter.  The SoC is supported by the RSL10 Evaluation Board, which provides access to all input and output connections through standard 0.1-inch headers. Additionally, the evaluation board offers an onboard communication interface circuit and a J-Link solution to enable users to debug the board through a USB/PC connection.

ON Semiconductor’s RSL10 SoC is designed to bring ultra-low-power connectivity to Internet of Things devices and high-performance wearables. The SoC supports a wide range of medical applications including fitness trackers, hearing aids, heart rate monitors, glucose monitors and pulse oximeters.


Dirk Giesen describes the Parasoft tool suite for Embedded Software Development

Are you responsible for embedded software development in your organization? Your goal should be to create safe, secure, and reliable software. To make sure your device will work properly, deploy Paras...


Ross Sabolik of Silicon Labs talks about advanced Power over Ethernet

In this video Ross Sabolik of Silicon Labs talks about smart  Power over Ethernet systems with Alix Paultre at their APEC exhibit in San ANtonio, Texas. As PoE migrates to higher power levels and...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


Steve Allen of pSemi explains their latest LED driver solution

Steve Allen of pSemi explains their latest LED boost product based on Arctic Sand's two-stage architecture. Their PE23300 has a charge-pump, switched-capacitor architecture that offloads most of t...


Teledyne describes their latest 12-bit Wavepro HD oscilloscope

In this video Teledyne LeCroy describes their latest Wavepro HD oscilloscope to Alix Paultre of Power Electronics News at the company's launch event. The WavePro HD high-definition oscilloscope de...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


ROHM explains their latest wireless battery charger solution kit

In this video an engineer from ROHM goes over their latest wireless power development kit, co-developed with Würth for embedded development. The kit provides a complete wireless power transfer sy...


Tektronix describes their latest mixed-signal oscilloscope

In this video Tektronix explains the features in their latest 5 Series MSO Mixed Signal Oscilloscope. Features include an innovative pinch-swipe-zoom touchscreen user interface, a large high-definitio...


AVX shows a supercapacitor demonstrator at APEC

In this video Eric from AVX explains their supercapacitor demonstrator box at APEC 2018 in San Antonio, Texas. The box shows how a 5V 2.5-farad supercapacitor can quickly charge up using harvested ene...


OnSemi explains their latest passive smart wireless sensor for industrial applications

In this video On Semiconductor explains their latest wireless sensor for hazardous environments at APEC in San Antonio, Texas. Intended for applications like high-voltage power cabinets and other plac...


TI demonstrates an improved gaming power system at Embedded World

In this video Texas Instruments' explains Significant reduction in ripple, which results in improved reliability and increased design margins, among other advantages. Another benefit that improve...


Infineon explains their latest motor drive technology at APEC 2018

In this video Infineon demonstrates new gate drivers using their LS-SOI technology at APEC 2018. In the demo Victorus, an Infineon application engineer, shows in real time how much better thermal the ...


STMicro goes over their latest wireless-enabled microcontroller for the IoT

In this video STMicroelectronics goes over their latest wireless-enabled STM32WB microcontroller for the IoT and intelligent devices in several live connectivity demonstrations at Embedded World 2018....