Silicon Labs: PoE ICs target IP cameras, wireless access points, IP phones and smart lighting

Silicon Labs has released two new Power over Ethernet (PoE) Powered Device families delivering best-in-class integration and efficiency for a wide range of Internet of Things applications. Silicon Labs’ Si3406x and Si3404 families include all necessary high-voltage discrete components on a single PD chip. The new PD ICs support IEEE 802.3 at PoE+ power capabilities, flexible power conversion options exceeding 90 percent efficiency, robust sleep/wake/LED support modes and superior EMI immunity. These capabilities help developers reduce system cost and time to market for high-power, high-efficiency PoE PD applications.

The Si3406x ICs integrate all power management and control functions required for a PoE+ PD application, converting the high voltage supplied over a 10/100/1000BASE-T Ethernet connection to a regulated, low-voltage output supply. The optimized architecture minimizes PCB footprint and external BOM cost by enabling the use of economical external components while maintaining high performance.

Complementing the Si3406x family, the Si3404 IC offers cost-effective, 802.3 Type 1 compliant support for lower power 15 W PoE PD applications. The Si3404 includes all interface and control functions required for low-power PD applications in a very small footprint.

The Si3406x ICs integrate diode bridges and a transient surge suppressor, enabling direct connection to an Ethernet RJ-45 connector. The regulator’s switching frequency is tunable with a simple external resistor value to avoid unwanted harmonics. An integrated synchronous driver can control a secondary side field effect transistor to improve power conversion efficiency. Connection to a PSE switch is maintained during sleep mode by an automated maintain-power-signature feature.

The Si3406x family’s current-mode-controlled switching regulator supports multiple isolated and non-isolated power supply topologies. The regulator is complemented by an integrated power switching FET. This flexibility, along with Silicon Labs’ comprehensive PoE PD reference designs, makes it easier for developers to deploy critical power supply subsystems.

Samples and production quantities of the Si3406x ICs are available now in low-profile, 5 x 5 mm QFN packages, and the Si3404 device is available now in a low-profile, 4 x 4 mm QFN package. To help developers reduce development time and cost, Silicon Labs offers a range of isolated and non-isolated Class 2-4 evaluation kits.


Keysight's Joachim Peerlings talks about the new UXR series Oscilloscope

In this video Keysight's Joachim Peerlings talks about the new UXR series Oscilloscope with Alix Paultre at their launch event in Munich. The Infiniium UXR-Series of oscilloscopes has models rangi...


BrainChip explains their new Neuromorphic System-on-Chip

In this video, Bob Beachler of BrainChip talks to Alix Paultre about their latest single-chip neural network technology.  Spiking neural networks (SNNs) are inherently lower power than traditiona...


Vincotech – EMPOWERING YOUR IDEAS

In this video the Vincotech team walks us through the most important topics displayed on their booth at PCIM Europe 2018. It also explains why Vincotech is First in SiC Modules. Being very flexible in...


Microchip talks about their latest secure microcontroller

Microchip's new SAM L10 and SAM L11 families of 32-bit microcontrollers (MCUs) address the growing need for security in Internet of Things (IoT) endpoints by protecting against the increasing the ...


E-Mail Newsletters

nlsc240

Our 3 E-Mail Newsletters: EETimes/EDN Europe, Embedded News and Power Electronics News inform about the latest news in technology and products, as well as technical know-how like white papers, webinars, articles, etc.


B & S / ECE Magazine

- latest issue is online now -

June 2018

Content Highlights

Cover Story

The challanges of IoT security and how to harden the edge

Download now