Cypress delivers robust wireless connectivity to Raspberry Pi 3 Model B+ IoT SBC

Cypress Semiconductor announced its Wi-Fi and Bluetooth combo solution delivers robust wireless connectivity to the new Raspberry Pi 3 Model B+ Internet of Things single board computer. The Cypress CYW43455 single-chip combo provides high-performance 802.11ac Wi-Fi for faster Internet connections, advanced coexistence algorithms for simultaneous Bluetooth and Bluetooth Low Energy (BLE) operations such as audio and video streaming, and low-power BLE connections to smartphones, sensors and Bluetooth Mesh networks. The combo’s high-speed 802.11ac transmissions enable superior network performance, faster downloads and better range, as well as lower power consumption by quickly exploiting deep sleep modes. The Raspberry Pi 3 Model B+ board builds on the success of existing Raspberry Pi solutions using Cypress’ CYW43438 802.11n Wi-Fi and Bluetooth combo SoC.

Wi-Fi networks powered by 802.11ac simultaneously deliver low-latency and high-speed with secure device authentication, making it the ideal wireless technology for connecting products directly to the cloud. The Raspberry Pi 3 Model B+ board with the highly-integrated Cypress CYW43455 combo SoC allows developers to quickly prototype industrial IoT systems and smart home products that leverage the benefits of 802.11ac. The Raspberry Pi 3 Model B+ board features a 64-bit, quad-core processor running at 1.4GHz, 1GB RAM, full size HDMI and 4 standard USB ports, Gigabit Ethernet over USB2, Power over Ethernet capability, CSI camera connector and a DSI display connector. The platform’s resources, together with its 802.11ac wireless LAN and Bluetooth/BLE wireless connectivity, provide a compact solution for the intelligent edge of connected devices.

The Cypress CYW43455 SoC features a dual-band 2.4- and 5-GHz radio with 20-, 40- and 80-MHz channels with up to 433 Mbps performance. This fast 802.11ac throughput allows devices to get on and off of the network more quickly, preventing network congestion and prolonging battery life by letting devices spend more time in deep sleep modes. The SoC includes Linux open source Full Media Access Control (FMAC) driver support with enterprise and industrial features enabled, including security, roaming, voice and locationing.

The CYW43455 SoC and other solutions support Bluetooth Mesh networks—low-cost, low-power mesh network of devices that can communicate with each other, and with smartphones, tablets and voice-controlled home assistants, via simple, secure and ubiquitous Bluetooth connectivity. Bluetooth Mesh enables battery-powered devices within the network to communicate with each other to easily provide coverage throughout even the largest homes, allowing a user to conveniently control all of the devices from the palm of their hand. The SoC is also supported in Cypress’ all-inclusive, turnkey Wireless Internet Connectivity for Embedded Devices (WICED) software development kit (SDK), which streamlines the integration of wireless technologies for IoT developers.


Grammatech talks about the importance of software in engineering

In this video Mark Hermeling of Grammatech talks to Alix Paultre after the Embedded World show in Nuremberg about the importance of software verification for security and safety in electronic design. ...


Lattice Semi walks through their booth demos at Embedded World

In this video Lattice Semiconductor walks us through their booth demonstrations at Embedded World 2018. The live demonstrations include an operating IoT remote vehicle, a low-power network used for vi...


Maxim describes their latest security solution at Embedded World 2018

In this video Scott from Maxim Integrated describes their latest security solution at Embedded World 2018. In the live demo he shows the DS28E38 DeepCover Secure ECDSA Authenticator, an ECDSA public k...


Garz & Fricke at Embedded World 2018 - Embedded HMIs and SBCs “Made in Germany”

You are looking for a HMI-system or single components as touches, displays and ARM-based SBCs? Welcome at Garz & Fricke – the Embedded HMI Company! Our offering ranges from typical single co...


ECRIN Systems myOPALE: Remote Embedded Modular Computers

myOPALE™ offers disruptive technology to multiply capabilities of your next Embedded Computers in a smaller foot print thanks to PCI Express® over Cable interconnect, standard 5.25’&rs...


TechNexion rolls out embedded systems, modules, Android Things kits at Embedded World 2018

In this video John Weber of TechNexion talks to Alix Paultre about how the company helps its customers getting products to market faster. By choosing to work with TechNexion, developers can take advan...


Mike Barr talks cybersecurity

In this video Mike Barr, CEO of the Barr Group, talks to Alix Paultre about cybersecurity at the Embedded World conference in Nuremberg, Germany. Too many designers, even in critical spaces like milit...


Ted Marena of Microsemi talks about their scope-free on-chip debug tools

In this video Ted Marena of Microsemi talks about their scope-free on-chip debug tools with Alix Paultre at Embedded World 2018. SmartDebug tool works with the Microsemi FPGA array and SERDES without ...


Infineon demonstrates their iMotion motor control solution at Embedded World

In this video Infineon explains their latest  IMC100 series iMOTION motor control IC at Embedded World 2018 in Nuremberg. The device provides a ready-to-use solution for high-efficiency variable-...


Samsung goes over their new ARTIK IoT development system

In this video James Stansberry of Samsung talks to Alix Paultre about their ARTIK IoT development system at Embedded World in Nuremberg. The family of system-on-modules provide a complete, production-...


Cypress explains their latest low-power 32-bit Arm Cortex-M4 PSoC 6

In this video Allen Hawes of Cypress Semiconductor talks to Alix Paultre about their latest low-power 32-bit Arm Cortex-M4 PSoC 6, designed to provide a secure high-performance MCU for next-generation...