Particle: production-ready LTE cellular solution for future proofing IoT

Particle announced the release of its LTE-enabled, cellular E Series IoT module. This all-in-one cellular solution is the first commercially available LTE hardware module for IoT product creators to future proof their devices along retiring 2G and 3G networks. Particle’s LTE module includes built-in cloud and SIM support, and is certified for the newly available LTE networks designed just for IoT.

Long Term Evolution (LTE) CAT M1 network technologies are optimized for Internet of Things applications for a number of reasons. LTE hardware is less costly, offers longer battery life, and improved connectivity range. These features make novel IoT applications – such as distributed sensor networks for agriculture or hard-to-reach industrial monitoring environments – possible, whereas they were not economically feasible in the past. These features, combined with LTE’s superior coverage, will facilitate the next wave of successfully deployed IoT products. Additionally, as US carriers move to eliminate 2G networks and end new 2G/3G device certifications, Particle’s LTE E Series provides a much needed transition path for IoT product creators while avoiding costly disruptions.

The LTE modules are part of Particle’s existing E Series suite — an enterprise-level collection of cellular IoT solutions (including 2G, 3G, and now LTE models) — that come bundled with the Particle Device Cloud, Device OS, and Particle’s extensive collection of developer tools. Particle’s pre-integrated cellular solution provides a faster, far less complicated path to market by taking care of the vast majority of the challenges that plague commercial IoT development — not least of which includes the extensive, time-consuming, and costly certifications required of connected devices (e.g. FCC; PTCRB; and Carrier-Specific).

The LTE lineup includes two LTE CAT-M1 models (LTE B13 and LTE B2/4/5/12) and is fully certified, low profile, surface mountable for industrial environments, and powered by Qualcomm’s MDM9206 IoT Modem and u-blox’s SARA-R410-02B module.


Bs&T at PCIM2018

powerlosstester presenting BsT-pulse 3 phase version and BsT-SQ for powerloss measurement of inductive components new findings of tester, the highest Bs ferrite material D9B for SiC application GaN fe...


Würth and AnDAPT describe their new programmable power solution

In this video an engineer from AnDAPT describes their new programmable power solution and their partnership with Würth at the APEC exhibition  in San Antonio, Texas. Drawing from Würth&...


MAGMENT: Magnetizable concretes, sole enablers for dynamic inductive wireless charging.

MAGMENT is a patented material technology, engineered from cement and magnetic particles from recycled electronic waste. We are the inventors and sole company worldwide to offer both the concrete mate...


A look at Analog Devices' wireless power demonstration at APEC 2018

In this video Steve from Analog Devices walks us through a wireless power transmission demonstration at APEC 2018 in San Antonio, Texas. The LTC4120 is a constant-current/constant-voltage wireless rec...


Analog Devices talks about their Power over Ethernet solutions at APEC

In this video Analog Devices talks about their Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. Their LTC4291 provides four PSE Ports with two power channels per port, and is fully co...


Silicon Labs demonstrates their latest PoE solutions at APEC 2018

In this video John Wilson of Silicon Labs demonstrates their latest Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. The live demonstration shows how a remote device can effectively p...


Vitrek explains their advanced testing solutions at APEC 2018

In this video Vitrek explains their advanced testing solutions at APEC 2018 in San Antonio, Texas. The devices displayed includes their 4700 high-voltage meter, which can measure up to 10kV and can pe...


Dirk Giesen describes the Parasoft tool suite for Embedded Software Development

Are you responsible for embedded software development in your organization? Your goal should be to create safe, secure, and reliable software. To make sure your device will work properly, deploy Paras...


Ross Sabolik of Silicon Labs talks about advanced Power over Ethernet

In this video Ross Sabolik of Silicon Labs talks about smart  Power over Ethernet systems with Alix Paultre at their APEC exhibit in San ANtonio, Texas. As PoE migrates to higher power levels and...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


Steve Allen of pSemi explains their latest LED driver solution

Steve Allen of pSemi explains their latest LED boost product based on Arctic Sand's two-stage architecture. Their PE23300 has a charge-pump, switched-capacitor architecture that offloads most of t...


Teledyne describes their latest 12-bit Wavepro HD oscilloscope

In this video Teledyne LeCroy describes their latest Wavepro HD oscilloscope to Alix Paultre of Power Electronics News at the company's launch event. The WavePro HD high-definition oscilloscope de...