Logic Technology: J-Testr RF, a new test solution for the IoT

Eiger Design, an innovative supplier of functional circuit test solutions to the electronics test market, announced the launch of a new test solution for todays integrated RF devices (e.g. Bluetooth, LORA, WIFI) and other RF applications including ISM 433MHz.

The J-Testr RF is a test solution designed specifically to test todays integrated RF devices for the IoT (Bluetooth, LORA, WIFI, etc.) and other RF applications (including ISM 433MHz). With a compact, space efficient footprint, competitive pricing, advanced features and flexibility the J-Testr RF enables large and small companies to effectively test their RF devices with confidence and significantly improve the quality of testing at the printed circuit board assembly stage.

Integrating an ‘exchangeable’ high RF isolation chamber, with full fixture (bed of nails) capability, the device under test, and its measurements, are shielded from almost all environments. The J-Testr RF eliminates the need for special ‘low RF noise’ rooms within a production environment and provides high quality and repeatable measurements. Special consideration has been given to ease of integration with open access to the RF chamber plus intelligent cabling and connector layout, creating a simple and cost- effective test solution.

RF instruments are integrated in such a way as to enable them to be controlled manually or automatically, via test sequencer software, that allows quick testing or debugging of devices with little or even no test software support. The RF instruments include digital displays at the user interface enabling the user to see the current RF signal measurement/outputs even during an automated test.

Designed not only to test RF functions the J-Testr RF includes a fully integrated standard J-Testr system with all the stimulation signals present within non-RF function test systems, which allows the device to receive a full functional test without the need for another test stage. These standard functional test features allow the same test station to be used for non-RF devices using low-cost standard J-Testr exchangeable kits extending the return on investment.

Latest News from Logic Technology

Logic Technology enriches GUI development with Crank Storyboard Suite
Logic Technology: J-Testr RF, a new test solution for the IoT
Logic Technology: FlashFX Tera 4.2 extends MLC NAND flash support for automotive and IIOT
Logic Technology: the ‘Swiss Knife’ for testing PCBA’s
Logic Technology: free seminars addressing software insecurities
Logic Technology: Systech and XJTAG offer enhanced testing
Logic Technology: professional GUI framework supporting NXP i.MX RT series
Logic Technology: high quality graphics using only internal memory
Logic Technology: faster electronics test development with XJTAG Boundary Scan v3.6
Logic Technology: Datalight releases NitroBoot 2.0
Logic Technology: GNU/Eclipse IDE for ARM now available for use on Linux workstations
Logic Technology: closing the gap between developers and designers
Logic-Technology: Cortex-M and Eclipse/GNU Training Course
Logic Technology: workshop on model-driven software design

DIN-Rail Embedded Computers from MEN Mikro

The DIN-Rail system from MEN is a selection of individual pre-fabricated modules that can variably combine features as required for a range of embedded Rail Onboard and Rail Wayside applications. The ...


Embedded Graphics Accelerates AI at the Edge

The adoption of graphics in embedded and AI applications are growing exponentially. While graphics are widely available in the market, product lifecycle, custom change and harsh operating environments...


ADLINK Optimizes Edge AI with Heterogeneous Computing Platforms

With increasing complexity of applications, no single type of computing core can fulfill all application requirements. To optimize AI performance at the edge, an optimized solution will often employ a...


Synchronized Debugging of Multi-Target Systems

The UDE Multi-Target Debug Solution from PLS provides synchronous debugging of AURIX multi-chip systems. A special adapter handles the communication between two MCUs and the UAD3+ access device and pr...


Smart Panel Fulfills Application Needs with Flexibility

To meet all requirement of vertical applications, ADLINK’s Smart Panel is engineered for flexible configuration and expansion to reduce R&D time and effort and accelerate time to market. The...


AAEON – Spreading Intelligence in the connected World

AAEON is moving from creating the simple hardware to creating the great solutions within Artificial Intelligence and IoT. AAEON is offering the new solutions for emerging markets, like robotics, drone...


ASIC Design Services explains their Core Deep Learning framework for FPGA design

In this video Robert Green from ASIC Design Services describes their Core Deep Learning (CDL) framework for FPGA design at electronica 2018 in Munich, Germany. CDL technology accelerates Convolutional...


Microchip explains some of their latest smart home and facility solutions

In this video Caesar from Microchip talks about the company's latest smart home solutions at electronica 2018 in Munich, Germany. One demonstrator shown highlights the convenience and functionalit...


Infineon explains their latest CoolGaN devices at electronica 2018

In this video Infineon talks about their new CoolGaN 600 V e-mode HEMTs and GaN EiceDRIVER ICs, offering a higher power density enabling smaller and lighter designs, lower overall system cost. The nor...


Analog Devices demonstrates a novel high-efficiency charge pump with hybrid tech

In this video Frederik Dostal from Analog Devices explains a very high-efficiency charge-pump demonstration at their boot at electronica 2018 in Munich, Germany. Able to achieve an operating efficienc...


Microchip demonstrates a flexible motion control platform at electronica

In this video Marcus from Microchip explains a motion control demonstration at their booth at electronica 2018 in Munich, Germany. The demonstration underscores the ability of the solution to rapidly ...


Infineon goes over their latest SiC devices for automotive systems

In this video an Infineon engineer goes over their latest Silicon Carbide (SiC) devices for automotive systems at electronica 2018 in Munich, Germany. Among the devices described are an inverter for a...


Bertrand Lombardo of Honeywell, Sensing requirements of IoT

Bertrand Lombardo, Sales director for EMEA for Honeywell SIOT discusses future sensing trends in relation to IoT at Electronica 2019 with Alix Paultre. Links to more information: Dynamic Hone...


Analog Devices updates their Silent Switcher technology

In this video an FAE from Analog Devices explains the latest version of their Silent Switcher technology, which addresses noise issues in power systems. He describes a live demonstration in their boot...


Western Digital talks about their automotive-grade memory solutions

In this video Martin Booth from Western Digital talks about the company's memory solutions specifically designed for automotive applications and the harsh environments involved. Systems such as ne...


Picotest demonstrates their latest advanced power test solutions

In this video Steve Sandler from Picotest shows us two of the company's latest test solutions at electronica 2018 in Munich, Germany. The first demo is of a micro-Ohm-resolution power rail measure...


STMicro describes their latest smart 48V DC brushless motor driver board

In this video an engineer from STMIcroelectronics explains a motor-driver board setup based on their L9907 smart power device at electronics 2018 in Munich, Germany. Based on BCD-6s technology. the de...


Microchip shows their newest PolarFire FPGAs at electronica 2018

In this video Microchip shows a one of the demos highlighting the capabilities of their newest low-power PolarFire FPGAs at electronica 2018 in Munich, Germany. The demonstration shown here is a kit f...


Western Digital discusses their memory solutions for Cloud-enabled devices

In this video Ze'ev Paas of Western Digital talks to Alix Paultre of Aspencore Media about their latest memory products at electronica 2018 in Munich, Germany. Depending on the application space, ...


Picotest explains a couple of power test systems at electronica 2018

In this video Steve Sandler from Picotest explains a couple of his power test systems at electronica 2018 in Munich, Germany. The first demonstration shows a micro-Ohm measurement system, and the seco...